Rigol DM3051 - Page 96

RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
2-46
Factory Defaults Setting
Press  System  Cfg  Default, then restart the system to factory default
state. The Parameter shown below:
Table 2- 34 Parameter Lists of Factory Defaults:
Math Function
Factory Defaults Setting
Math Stats
Close
Math
Statistic
Math Register
All registers cleared
* dBm Resistance
*600Ω
Trigger Parameter
Factory Defaults Setting
Interval
30ms、200ms、400ms according to Digit Resolution
Samples
1
Hold
0.1％
Trigger Sources
Auto Trigger
Measurement
Parameter
Factory Defaults Setting
* Continue Resistance
10Ω
Filter
Fast
DC Resistance
10MΩ
Digit Resolution
6 ½
Rate
Close
Measurement Function
DCV
range
Auto