Rigol DM3068 Manual

FAQ
Instrument Solution – FAQ
Solution Title
Using the DM3068 Internal Webpage
Date:11.16.2011
Solution: The DM3068 has an internal webpage for verification of remote
operation via Ethernet. Here are the steps to begin operating the instrument via the
Ethernet connection.
1. Connect the power cord to the instrument and power on.
2. Connect an ethernet cable to the instrument and to an operational ethernet
connection (switch, PC, router, etc..)
3. Check the IP address of the DM3068
• Press Utility > T/C softkey > Info

Rigol DM3068 Specifications

General

Display Digits	6.5
Power Supply	100-240 V AC, 50/60 Hz
Weight	3.7 kg
DC Voltage Range	200 mV to 1000 V
DC Voltage Accuracy	±(0.0035% of reading + 0.0005% of range)
AC Voltage Range	200 mV to 750 V
AC Voltage Accuracy	0.06%
DC Current Range	200 µA to 10 A
DC Current Accuracy	0.05%
AC Current Range	200 μA ~ 10 A
Resistance Range	200 Ω ~ 100 MΩ
Resistance Accuracy	0.01%
Capacitance Accuracy	1%
Frequency Accuracy	0.01%
Temperature Range	-200°C
Connectivity	USB, LAN, GPIB