Rigol RSA3000 Series

Chapter 5 Shortcut Key RIGOL
RSA3000 User Guide 4-3
4. Signal Gain State
Sets the signal gain state to "Manual" or "auto".
5. Signal Gain
Sets the signal gain to adjust the signal energy. When the signal amplitude is
small, the better demodulation effect can be obtained by adjusting the gain
value. You can use the numeric keys, the knob or the arrow keys to modify this
parameter. You can also use the touch screen to modify the parameter. For
details, please refer to "Parameter Setting".
Table 4-4 Signal Gain
Parameter
Remarks
Default
7
Range
1 to 7
Unit
N/A
Knob Step
1
Arrow Key Step
1