Chapter 2 Functions of the Front Panel RIGOL
VNA User Guide 2-65
You can also touch the screen or use the mouse to touch or click the Save As
menu, and then input the filename with the keypad.
All Above
Press All Above to enter the file saving menu for all types of files. All the types of
files (State, Trace&State, and Calibration Data&State) are saved to the file.
1. Save
Press this key to save all the available files with the default filename or
user-defined filename.
The default filename is determined by the following methods:
⚫ If you haven't input a filename by pressing the Save As key, its default
filename is all<n>.trs. Wherein, n refers to the file number of the filenames
that are named based on the naming mode in the current file directory. The
value of <n> is the existing maximum file number plus 1.
⚫ If you have pressed the Save As key to input the filename abc, then the file
is saved to be "abc.trs". After that, press the key again, another file is saved
automatically with the filename "abc1.trs".
2. Save As
Press this key and then use the numeric keypad on the front panel to input the
filename. Then, press Save to save the corresponding Limit file.
You can also touch the screen or use the mouse to touch or click the Save As
menu, and then input the filename with the keypad.
3. Save From Trace
Selects the trace to be saved. You can select any trace from Trace 1 to Trace 4.
Screen Image
Press Screen Image to enter the screen saving menu.
1. Save
Press this key to save the current screen image in the default filename or
user-defined filename.
The default filename is determined by the following methods:
⚫ If you haven't input a filename by pressing the Save As key, its default
filename is screen<n>.jpg. Wherein, n refers to the file number of the
filenames that are named based on the naming mode in the current file
directory. The value of <n> is the existing maximum file number plus 1.
To Next Page
Loading...
