Rikon Power Tools 10-345 User Manual

18” Woodworking Bandsaw
Model: 10-345
Owner’s Manual
For more information:
www.rikontools.com or info@rikontools.com
For Parts or Questions:
techsupport@rikontools.com or 877-884-5167
Record the serial number and date of purchase
in your manual for future reference.
Serial number:
Date of purchase:
Part #10-345M3

Rikon Power Tools 10-345 Specifications

General

Brand	Rikon Power Tools
Model	10-345
Category	Saw
Language	English

Summary

Operator Safety: Required Reading

General Safety Warnings

Covers fundamental safety precautions and practices to prevent accidents during operation.

Special Safety Rules For Bandsaws

Specific safety guidelines tailored for the proper and safe use of bandsaws.

Specifications

Assembly

Adjustments

Setting the Table Square to Saw Blade

Steps to ensure the table is perfectly perpendicular to the saw blade.

Tilting the Table

Instructions on how to adjust the table angle for bevel cuts.

Tracking the Saw Blade

Guidance on aligning the blade to run correctly on the wheels.

Adjusting the Blade Tension

How to set the correct tension for the bandsaw blade.

Adjusting the Blade Guides

Changing the Blade Speed / Belt Tension

Replacing the Bandsaw Blade

Operation

Eletrical Requirements

Maintenance

Troubleshooting

Adjusting the Upper Blade Guide Bearings Parallel to the Blade

Adjust Upper Bearings Which Will Not Track Close to the Blade

How-To's for all Band Saw Blades

Diagnosing Problems

A guide to identifying and resolving common issues encountered during operation.