Rikon Power Tools 70-105 User Manual

70-105
www.rikontools.com
70-105M3
10” x 18” Mini Lathe
Operator’s Manual
Record the serial number and date of purchase in your manual for future reference.
Serial Number: _________________________ Date of purchase: _________________________
For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877)884-5167
4001824

Rikon Power Tools 70-105 Specifications

General

Motor	1/2 HP
Swing Over Bed	10 inches
Distance Between Centers	18 inches
Weight	160 lbs.
Speed Range	250 - 3, 850 RPM
Spindle Thread	1" x 8 TPI
Spindle Taper	MT2
Tailstock Taper	MT2
Headstock Taper	MT2
Motor Voltage	120V

Summary

Safety Instructions

Safety Symbols

General Safety

Covers essential safety practices before operating the machine, including environment and personal conduct.

Before Using Your Machine

Electrical Safety

Extension Cords

Specific Safety Instructions for Wood Lathes

Getting to Know Your Machine

Installation

Moving & Installing the Lathe

Guides on safely moving and properly positioning the lathe for operation.

Assembly

Adjustments

Adjusting the Tool Rest

Adjusting the Tailstock

Changing Spindle Speeds

Changing the Drive Belt

Operation

Typical Lathe Turning Operations

Provides guidance on setting up the lathe for spindle turning and recommended RPM speeds.

Maintenance

Wiring Diagram

Troubleshooting

Warranty

Parts Diagram

Parts List