Rillpac BT30 - Troubleshooting; 5. How to Connect with a Computer?; 6. Reconnection; 7. Restore to Default Configuration

3. When blue light flashes, keep pressing until red and blue light flashes alternately
4. Turn on Bluetooth of mobile, select pair name of headset “Rillpac BT30” to connect
5. When blue light flashes alternately it is connected successfully.
5. How to connect with a computer?
1. Download a Bluetooth driver and install it;
2. Insert a Bluetooth adapter/Open Bluetooth in computer;
3. Power on Bluetooth headset and long press multi-function button around 5 seconds till
red and blue lights flash alternately (pairing status);
4. Select pair name “Rillpac BT30” to connect.
5. Initial password: 0000(if applicable)
6. Reconnection
Option 1: Press multi-function button;
Option: 2: Reconnect in mobile Bluetooth manual.
7. Restore to default configuration
1. Long press multi-function button during charging;
2. It restores to default configuration when red and blue light alternatively flashes 3
times.
8. Trouble shooting
1. Unable to locate the pair name of headset?
Possible causes：
a. Bluetooth headset is not under pairing status;
b. Bluetooth program error with Bluetooth headset;
c. Bluetooth program error with mobile phone.
Solution：
1.Turn on Bluetooth headset and long press multi-function button to activate Bluetooth
pairing. (Blue and red light flashes alternatively).
2. Restore to default configuration;
3. Restart mobile phone.
Tips：
1. Pair status will be standby for 3 minutes please connect within that period otherwise
Bluetooth headset will power off automatically.
2. During charging status press multi-function button for 5 seconds until blue and red light
flashes 3 times.
3. Clear up all Bluetooth pairing names in mobile phone after reboot.
2. No sound from Bluetooth headset