Operation Instruction for SWING
Before you use SWING with UNION, please power off strobes. You will experience the great performance of both strobe and SWING.
Transmitter
- Join the transmitter to a digital camera
Receiver
- Join the receiver to a strobe.
Notice) when a user set the channel of SWING, the user should adjust the same number of both transmitter and receiver.
It can set the maximum 6 strobes per a transmitter under the same channel
If a user uses over 6 strobes under the same channel, the effective distance from both a transmitter and a receiver can be shorter.
TEST Button
The LED lamp is flickered when a user presses “TEST” button.
To Next Page
Loading...