Need help?Do you have a question about the Rimoldi 327 and is the answer not in the manual?
General| Brand | Rimoldi |
|---|---|
| Model | 327 |
| Category | Sewing Machine |
| Language | English |
Instructions for installing the sewing machine head onto the base using belt connection.
Details the procedure for the normal setting of the sewing machine base.
Explains how to set up the sewing machine for a submerged installation.
Covers fitting and adjusting the trapezoidal drive belt between the motor and machine head.
Step-by-step guide on how to correctly position the needle in the needle holder.
Instructions for safely stopping the machine and replacing a needle.
Guidance on correctly positioning the presser-foot and adjusting its pressure.
Explains how to adjust the height and timing of the lower looper mechanism.
Details the process of aligning and adjusting the upper looper for proper stitch formation.
Instructions for mounting and adjusting the needle guards for safety and stitch formation.
Covers the installation and adjustment of both the lower and upper knives.
Specific steps for mounting and setting the upper knife relative to the lower knife.
How to slightly adjust the cut bight width by modifying knife positions.
Instructions for mounting, adjusting height, and setting feed-dog positions.
Guide to adjusting the differential feed ratio for proper fabric handling.
Steps to adjust the stitch length using the handwheel and regulator.
How to adjust thread tension by modifying the spring pressure in the tension discs.
Guidance on periodically sharpening the machine knives using specific tools.
Instructions for adjusting and positioning the auxiliary roller feed mechanism.
Daily cleaning routine for feed and stitch formation parts.
Weekly maintenance tasks including cleaning feed-dogs, loopers, and internal parts.
Periodic oil replacement and cleaning of the main filter.
Common causes for irregular stitches, including tension and threading issues.
Probable causes for inconsistent fabric feeding, such as presser foot pressure and knife condition.
Reasons for skipped stitches, including looper and needle positioning.
Factors contributing to thread breakage, like tension and winding issues.
Causes for needle breakage, such as bending or improper mounting.
Potential reasons for holes in fabric, including blunt needles or incorrect type.
Causes for oil leakage, such as loose screws or faulty packing.
Reasons for insufficient lubrication, including low oil level or blocked passages.
To Next Page