Need help?Do you have a question about the Rimoldi 263 and is the answer not in the manual?
General| Type | Overlock |
|---|---|
| Number of Needles | 2 |
| Number of Loopers | 2 |
| Stitch Types | Overlock |
| Stitch Length | Up to 4 mm |
| Differential Feed | Adjustable |
| Threading | Color-coded |
Steps for setting up the sewing machine head and connecting it to the motor.
Instructions for filling the machine with the correct lubricant before operation.
Correctly positioning and replacing the sewing needle for optimal stitch formation.
Centering the presser foot and adjusting its pressure for fabric handling.
Detailed instructions for setting the lower looper, including specific machine types.
Specific guidance for setting loopers on machines equipped with front loopers.
Instructions for setting loopers on machines with tandem loopers, referencing lower looper settings.
Procedure for adjusting the upper looper's position and thread take-up.
Fitting front and rear needle guards on various machine series (261, 263, 264).
Adjusting feed dogs, movable needle guards, and differential feed systems.
Adjusting differential feed ratio, device, and stitch length for precise sewing.
Regulating thread tension and adjusting take-up mechanisms for proper stitch formation.
Setting trimming knives, disconnecting them, and adjusting feed rollers and pullers.
Daily, weekly, and 3-monthly tasks for keeping the machine in perfect condition.
To Next Page