Need help?Do you have a question about the Rinex GA8500 and is the answer not in the manual?
Explains the purpose and scope of this addendum manual for GuideTRAX V3.3.
Lists relevant previous user manuals and supersedes H series models with GA8500.
Provides an overview of the GA8500 system, its design, and hardware features.
Introduces GuideTRAX V3 software, its modularity, and relation to GA8500.
Details specific changes and amendments for previous GuideTRAX V3.2 user manuals.
Notes specific sections from the HL User Manual that are obsolete or amended.
Notes specific sections from the HT User Manual that are obsolete or amended.
Notes specific sections from the HR User Manual that are obsolete or amended.
Outlines the sole recourse for defective products.
Lists conditions under which the warranty is void or does not apply.
States that all other warranties are excluded.
Defines the limits of RINEX's liability for damages.
Specifies the laws governing the warranty.
Details the process for obtaining warranty service.
Identifies the main components: GA8500 console and AS300 Hub.
Details the function and location of the GA8500's top panel buttons.
Explains the purpose, ports, and connections of the AS300 Hub.
Describes the system's power operation and management.
Explains operation of the power control button for starting and stopping.
Describes configuration for automatic start/stop with vehicle ignition.
Illustrates the initial screens displayed during system startup.
Explains how to configure the Master Switch for recording treatments.
Details how to program the GA8500's user-configurable buttons.
Introduces the Launcher utility for system configuration.
Provides the procedure for accessing the Launcher program.
Presents detailed specifications for the GA8500 console and AS300 Hub.
To Next Page
General