Ring Automotive DCCHARGE30

To Next Page

Source segment

Zielsegment

DCCHARGE30

DC/DC Battery Smart Charger

DC/DC Intelligentes Batterie-Ladegerät

RSCDC30

Instructions

Bedienungsanleitung

Retain these instructions for future reference

Bewahren Sie diese Bedienungsanleitung für später auf

DCCHARGE30 DCCHARGE30

1 Safety 1 Sicherheit

• Explosive gasses may escape from battery during the charging

process.

•

Es können während des Aufladeprozesses explosive Gase von der

Batterie entweichen.

• Prevent flames and sparks and provide adequate ventilation during

charging

• Vermeiden Sie offene Flammen und Funken und sorgen Sie für

ausreichende Belüftung während des Ladens

• Do not expose to excessive heat, moisture and dust

• Nicht übermäßiger Hitze, Feuchtigkeit und Staub aussetzen

• Not suitable for use with non-rechargeable batteries

• Nicht geeignet für den Gebrauch mit nicht-aufladbaren Batterien

• Do not connect energy sources other than a solar panel to the solar

(PV) inputs

• Keine andere Stromzufuhr als die von einem Solarmodul an die solar

(PV) Verbindungen anschließen

• Do not operate if there is damage to the unit or connected cables

• Nicht in Betrieb nehmen, wenn das Gerät oder angeschlossene

Kabel beschädigt sind.

•

Always follow charging instructions of the battery manufacturer

•

Immer den Ladeanweisungen des Batterieherstellers folgen

2 Installation

2 Zusammenbau

Solar Panel

Solarmodul

Temp Sensor

Temperaturfühler

DC-DC Charger

DC-DC Lader

Inputs

Eingang

Outputs

Ausgang

Source battery

Ausgangsbatterie

Target Battery

Zielbatterie

Need help?

Do you have a question about the Ring Automotive DCCHARGE30 and is the answer not in the manual?

Summary

Safety Information

General Safety Warnings

Key safety precautions for operating the battery charger, including ventilation and electrical safety.

Installation Guide

Components and Connections

Lists the essential components and connection points for setting up the system.

Installation Procedure

Detailed, numbered steps for mounting the unit and connecting all necessary components.

Setup and Configuration

Battery Settings Overview

Details on configuring BULK and FLOAT charging voltages for different battery types.

Bulk Charge Voltage Configuration

Instructions for setting the BULK charging voltage using the device controls.

Float Charge Voltage Configuration

Instructions for setting the FLOAT charging voltage using the device controls.

Temperature Compensation

Explanation of how temperature compensation adjusts charging voltage for optimal performance.

Over-Discharge Protection

Details on the unit's protection feature that prevents battery over-discharge.

Solar Priority Mode Configuration

How to configure the system to prioritize charging from the solar panel input.

System Operation and Modes

Multi-Stage Charging Modes

Explanation of the different charging stages: Bulk, Absorption, Float, and MPPT.

Display, Controls, and Modes

Keypad and LCD Controls

Overview of the keypad buttons and the LCD screen layout for device interaction.

LCD Display Information

Details on the information displayed on the LCD screen, including status and measurements.

Display Navigation and Selection

Instructions on how to navigate through the display menus and select different information views.

Standby Mode Operation

Explanation of when the unit enters standby mode and its purpose.

Sleep Mode Operation

Details on how the unit enters sleep mode to conserve power.

Troubleshooting and Error Codes

Error Codes and Solutions

List of common error codes, their causes, and recommended solutions for troubleshooting.

Technical Specifications

Product Specifications Overview

Key technical data including voltage, current, temperature ratings, dimensions, and weight.