ring ecBAC-1 - Page 2

21
Included installation hardware.
• (1) Ring Access Controller Pro 2
• (1) 8-pin, 3.5 mm Pitch Terminal Block Connector
• (1) Puck Antenna
• (4) Cable Labels
• (2) Adhesive Strips
• (1) USB Adapter
You’ll also need…
• Wires (18-22 AWG)/Cables for Connector Terminals
• Precision Flathead Screwdriver
• Wire Strippers
• Optional: RJ45 Ethernet Cable (≤ 3 meters)
• Optional: PVC Junction Box (if installed outside
of the call box or existing junction box)