Need help?Do you have a question about the ring Pro 2 and is the answer not in the manual?
General| Model | Ring Pro 2 |
|---|---|
| Video Resolution | 1536p HD |
| Connectivity | 2.4 GHz and 5 GHz Wi-Fi |
| Power | Hardwired (16-24 VAC) |
| Audio | Two-way audio with noise cancellation |
| Smart Features | Motion detection, Alexa compatibility |
| Weather Resistance | Yes |
| Compatibility | Works with Alexa |
| Night Vision | Yes (Infrared) |
Download the Ring app from the App Store or Google Play to set up your device.
Select "Set Up a Device" in the Ring app and follow the on-screen instructions for setup.
Loosen terminal screws, strip wires, insert, and tighten to secure connections.
Note that positive and negative terminals are interchangeable for wiring.
Identify a knockout on the call box or junction box at least 1/2" away from the wall.
Connect wires to desired access control terminals using included cable labels for identification.
Unscrew nut/washer, insert cable through knockout, place washer, and screw nut to secure antenna.
Ensure the puck antenna is outside the call box or junction box after installation.
Apply adhesive strips to the back of the controller and press against a clean surface for 30 seconds.
If mounting outside, drill a hole for antenna and terminal block wires.
Plug the terminal block connector into the mating connector on your Access Controller.
Attach the puck antenna connector to the antenna port on the controller until it locks.
If using Ethernet, plug the cable into the Ethernet port on the controller.
For devices mounted outside, plug into an outlet using the included USB cable and power brick.
For devices mounted inside, connect power wires to terminals 7 and 8 on the terminal block.
Understand PWR solid light for powered status and CELL color codes for coverage.
Learn about CON flashing light for internet and RUN flashing light for device operation status.
Interpret REC solid light for recording mode and DR1/DR2 solid light for door opening.
Device installation must be done by a professional installer or licensed electrician.
Follow safety instructions to prevent fire, electric shock, injury, or damage.
Avoid direct sunlight, moisture, and salt water; charge only indoors in dry conditions.
View model number, temperature rating, and power input/output details for the device.
Understand guidelines to prevent harmful radio interference in residential installations.
Device meets FCC emission guidelines; check FCC ID for details on fcc.gov.
Device complies with FCC limits for uncontrolled environments and RF rules.
Find contact name, number, and email for Ring Access Controller Pro 2 technical support.
Information on warranty and terms of service can be found at ring.com/legal.
To Next Page
