1615
LED and Connector Terminal Indicators.
PWR: Solid light indicates the device is powered
CELL: • Red indicates no cellular coverage
• Yellow indicates low cellular coverage
• Green indicates good cellular coverage
• White indicates the device is using Ethernet
• Blue indicates attempting to get cellular strength
LED and Connector Terminal Indicators (cont).
CON: Flashing light indicates device has
Internet connectivity
RUN: Flashing light indicates device is running
as programmed
REC: Solid light indicates device is in record mode
and scanning for access credential (only occurs
while provisioning a fob credential)
DR1 and DR2: Solid light for 2 seconds indicates
respective door is opening at that time
To Next Page
Loading...