ring Flood - Battery Replacement and LED Status

How to replace the battery:
Twist the licJ 011 the Sensor counter-
clockwise and lift to remove. Replace the
battery with a fresh CR 1 23A cell.
The Sensor then reconnects to your Ring
Base Station automatically.
LED status patterns:
Water or low o
temperature Blue Blink (1 x)
detected
Sensor
tampered
Red Blinks (3x)
For info on other LED patterns,
visit ring.com/l1elp .
Cl 2018 Ring LLC or •ts affihales.
RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affthates.
Last updated 10/30/ 18