To Next PageTo Next Page
Need help?Do you have a question about the ring PowerSourceProRINV1100 and is the answer not in the manual?
General| Model | PowerSource Pro RINV1100 |
|---|---|
| Type | Power Inverter |
| Input Voltage | 12V DC |
| Output Frequency | 60 Hz |
| Waveform | Modified Sine Wave |
| AC Output Power | 1100W |
| AC Outlets | 2 |
| Protection | Overload, Short Circuit |
| Cooling | Fan Cooled |
Keep the inverter away from liquids at all times to prevent damage and ensure safety.
Do not use the inverter if leads are damaged to avoid risk of electric shock.
The 220/240v AC socket for connecting devices.
Digital display showing voltage or amperage.
Switch to select between voltage and amperage display.
The main power switch for the inverter.
A USB port for charging devices.
The 220/240v AC socket for connecting devices.
Digital display showing voltage or amperage.
Switch to select between voltage and amperage display.
The main power switch for the inverter.
The inverter operates from a 12V DC power source, with a variance of 10.5V to 15V.
Ensure the inverter is placed in a well-ventilated area on a flat surface.
Do not place near direct heat sources or expose to sunlight.
Do not place or operate the inverter in or around flammable environments.
The inverter can be mounted vertically or horizontally; ensure ventilation openings are correctly oriented.
Before connecting, ensure the ON/OFF switch is in the OFF position.
Attach the black (-) cable to the black terminal on the inverter and battery.
Attach the red (+) cable to the red terminal on the inverter and battery.
Do not operate the inverter without connecting to ground.
Before removing cables, ensure accessories are unplugged and the power switch is ON.
Ensure the inverter ON/OFF switch is in the OFF position before operation.
Plug appliance into socket, ensuring power draw does not exceed rating.
Turn the main power switch to the ON position to begin operation.
Ensure the inverter ON/OFF switch is in the OFF position before using the remote.
Connect the remote control wireless receiver to the inverter's port.
The highest power output the inverter can handle.
The sustained power output over a specified period (e.g., 12 hours).
The surge power capacity for short durations.
Current drawn by the inverter when not in use.
Indicates the type of AC waveform produced (e.g., Modified Sine Wave).
The acceptable range of DC input voltage for operation.
The percentage of input power converted to output power.
The weight of the inverter in kilograms.
