Automatic digital air compressor + Inflator & Deflator and LED light
RAC640
Caution
Before operating this compressor, please read these instructions and retain for future reference.
Read Carefully
Improper use of the compressor can cause damage to property and possibly harm the user.
When using the compressor ensure the vehicle is parked in a safe location, off the road with the
vehicle handbrake on and where your personal safety is not at risk.
Power Supply
o Power required 12 volts DC rated at 10 amps.
Fuse Replacement
o The fuse is located in the 12v DC plug. Unscrew the end of the DC plug & extract the
10amp fuse taking care to note the order of components. Check the fuse and replace if
necessary with an equivalent 10amp fuse.
Cleaning
o Only clean the compressor using a clean dry cloth.
o Do not use cleaning products.
o Ensure the compressor is clear of any dust or other debris before connection.
Caution
o Inspect before each use.
o Do not use the compressor when the vehicle is moving.
o Do not leave connected to 12v DC socket unattended.
o Do not put the compressor on or near sources of direct heat or expose to direct sunlight
o Do not operate the compressor in or around flammable environments.
o Do not kink or block the air hose while the compressor is working.
o Do not use the compressor if bent, broken, melted, burnt, wet or any of the components
are damaged.
o Do not use the air compressor on high pressure tyres such as those used on commercial
vehicles, agricultural or specialist vehicles.
o Only use the adapters supplied with the device.
o The compressor is not waterproof.
o Ensure cables and hoses connected to the compressor do not interfere in the safe
operation of the vehicle.
o When not in use store in a cool, dry dust fee environment in the nylon bag provided.
o This compressor is not designed for continuous use. Operation over an extended period
of time will overheat the unit and damage the compressor. It should not be used
continuously for more than 30 minutes. After 30 minutes, turn it off and let it cool for 15
minutes before resuming operation.
o If the compressor is making an abnormal sound, or the temperature of the unit is too
high, turn the power off immediately and let it cool for at least 30 minutes before
resuming operation.
o The compressor contains no user serviceable parts – Do not open.
Tyre Checks
o Check tyres on a monthly basis.
o Incorrect inflation shortens the life and performance of your tyres, increasing fuel
consumption and jeopardising safety.
To Next Page
Need help?
General
