Need help?Do you have a question about the ring Solar Pathlight Smart Lighting and is the answer not in the manual?
Download the Ring app for guided setup and management of your Pathlight.
The Ring Bridge is essential for connecting your Ring Smart Lights to the app and other compatible devices.
Twist the top cap counterclockwise to unlock and remove it from the base.
Remove the battery pull-tab to activate the Pathlight. Handle battery with care to avoid fire or explosion risks.
Guide the light's channel onto the pole's rib and push together until snug.
Charge your Pathlight using a micro USB cable and configure it via the Ring app for smart lighting control.
Drive the stake into sunlight-rich ground, ensuring sensor direction is set, then twist the Pathlight onto the stake to lock.
Access online help, visit ring.com/help, or call support numbers for assistance.
To Next Page
General