WARNING: Risk of
electrical shock.
If your local laws require
it, installation and wiring
must be performed by a
licensed electrician.
Disconnect power at the
fusebox or consumer
unit before installing.
Verify that the supply voltage is correct. Connect
fixture to a 100 VAC~240 VAC 50/60 Hz power
source.
Always follow electrical code standards when
installing wired connections.
CAUTION: Risk of fire
Do not install near combustible or flammable
surfaces.
NOTICE
Do not connect this light fixture to a dimmer
switch or timer.
1. Install
your
Spotlight
Cam.
3
To Next Page
Loading...
