ring Transformer User Manual

Choose a location.
You’ll have to plug in your Transformer, so the
best place for it is near an outlet (make sure it’s
a covered, weatherproof Class A GFCI protected
outlet).
Once you’ve decided on a spot, use the included
mounting template to mark the screw holes.
To avoid damage to your Transformer, make
sure the top screws are at least 18” above the
ground.
Insert the top screws.
Drive the top screws first, leaving 1/8” of space
between the mounting surface and screw heads.
If mounting on a masonry surface or drywall, use
a 1/4” drill bit to drill pilot holes at each mark and
insert the anchors.
1/8”
1/8”
76

ring Transformer Specifications

General

Brand	ring
Model	Transformer
Category	Controller
Language	English