Need help?Do you have a question about the Rinnai CNTRLDRCIPW and is the answer not in the manual?
General| Type | Wireless Remote Control |
|---|---|
| Compatibility | Rinnai Tankless Water Heaters |
| Display | LCD |
| Temperature Range | 98°F to 140°F (37°C to 60°C) |
| Power Supply | Battery |
| Connectivity | Wireless |
| Power Source | Battery |
| Color | White |
| Features | Error Code Display |
| Functions | Temperature Adjustment, Error Display |
| Mounting | Wall Mount |
| Battery Type | 2 x AA Batteries |
Crucial safety instructions, warnings, and clearance requirements before installing the wired controller.
Guidance on selecting the installation site and confirming supplied parts for proper setup.
Technical dimensions of the controller and steps for removing and fastening the back plate.
Detailed instructions for battery installation and connecting the controller to the indoor unit.
Procedures for setting up and configuring multiple controllers on the same system, including dip switch settings.
Instructions for reattaching the controller's front fascia to the backing plate after wiring.
Specifies the cable type, length, and Rinnai accessory recommended for controller wiring.
Comprehensive list of features and functions available on the wired remote controller.
Explains the various indicators, icons, and information displayed on the controller's TFT screen.
Identifies each physical button on the controller and its corresponding operation.
Guide on starting the controller, understanding power-on/off states, standby, and screen-off modes.
How to select operating modes and adjust temperature settings, including specific function limitations.
Instructions for adjusting fan speed and fan direction (louver swing).
Details on special functions like Turbo, ECO, Sleep, and their operational requirements.
How to use features like Child Lock, Filter Reminders, Self-Clean, Timers, and Schedules.
Explains Delay Off, Remote Control Reception, Auto Restore, and other operational modes.
Safety precautions and system requirements for setting up wireless control via the mobile app.
Instructions to download the app, install it, and register your user account for remote control.
Procedures for connecting the controller to your Wi-Fi network using Bluetooth scan.
Steps for configuring the network by selecting the specific appliance type, often used when Bluetooth fails.
Guide to logging into the app, selecting your appliance, and controlling basic functions.
Instructions on setting daily schedules and weekly timers for automated air conditioner operation via the app.
Details on customizing sleep settings and temperature curves through the mobile application.
Details FCC and IC compliance, including device operation conditions and potential interference.
Information on FCC radiation limits and safe operating distances from the antenna.
Explains consumer guarantees and rights under Australian Consumer Law for purchased goods and services.
Outlines the specific warranty terms, conditions, and exclusions for the Rinnai DRCI R32 Wired Controller.
To Next Page
