Rinnai PEPH-10PEW User Manual

For safe and reliable operation and optimum
performance this appliance must be operated, installed
and maintained in accordance with these instructions.
Read these instructions thoroughly before attempting
installation and operation.
Keep these instructions handy for future reference.
Operation & Installation Manual
Electric Panel Heaters
Models: PEPH-10PEW, PEPH-15PEW & PEPH-22PEW

Rinnai PEPH-10PEW Specifications

General

Model	PEPH-10PEW
Brand	Rinnai
Category	Electric Heater
Voltage	240V
Phase	Single Phase
Maximum Power	10 kW
Heating Capacity	10 kW
Frequency	60Hz
Water Connection	1/2 inch NPT
Temperature Range	86°F - 140°F (30°C - 60°C)
Safety Features	Overheat protection

Summary

Safety & Important Points

Safety Precautions

Provides crucial safety precautions to minimize risks of overheating, fire, electric shock, and injury during use.

How to Operate the Heater

Manual Operation

Explains how to turn on the heater, set the temperature manually, and stop operation, including indicator functions.

Programmed Operation

Introduces the programmable operation function allowing users to set timed heating periods over a 24-hour cycle.

Setting The Clock

Setting The Programmed Operation Timer

Details the process of setting ON and OFF timer periods using the PROG button and selection blocks for automated operation.

Anti-Frost Protection Function

Electronic Lock Function

Installation

Wall Installation

Details the required clearances around the heater for wall installation and provides steps for mounting the bracket.

Freestanding Installation

Provides step-by-step instructions for attaching the castors to the heater for freestanding installation.