To Next PageTo Next Page
Need help?Do you have a question about the Rinnai RC98I and is the answer not in the manual?
General| Brand | Rinnai |
|---|---|
| Model | RC98I |
| Category | Water Heater |
| Language | English |
Explanation of safety alert symbols like DANGER, WARNING, and CAUTION.
Guidelines for safe operation and installation of the appliance.
Overview of built-in safety mechanisms like overheat and flame failure shut-down.
Details the functions of various Rinnai temperature controllers.
Steps to adjust water temperature using the controller.
Instructions for the automatic bath filling feature.
How to enable or disable controller beep sounds.
Instructions for setting the clock on the temperature controller.
Procedure for cleaning the water heater's internal components.
Guidance on inspecting the indoor vent system annually.
Information on scale build-up and the LC error code.
How to visually inspect the burner flame for proper operation.
Procedure to flush the heat exchanger due to lime build-up.
How to retrieve recent error codes and operating data.
Guidelines on acceptable water quality levels for the appliance.
General guidelines and warnings for installing the water heater.
Required clearances for safe installation around the appliance.
Instructions on how to securely mount the water heater.
Requirements for connecting the appliance to power.
Essential guidelines for gas piping installation and safety.
An example demonstrating how to size gas piping for the appliance.
Details on isolation valves and the pressure relief valve.
Steps for correctly installing the pressure relief valve.
Recommended maintenance for the pressure relief valve.
General guidelines for water piping, including potable water use.
Information on the appliance's freeze protection features.
Guidance on piping for freeze protection.
Diagram for basic water piping setup.
Diagram for circulation system piping.
Rules for direct vent, intake, and exhaust component installation.
Information on the condensate trap, drain line, and disposal.
Guidelines for determining maximum vent pipe length.
Required clearances for the flue terminal.
Specific clearances for RC80i/RC98i vent terminals.
Specific clearances for RC80e/RC98e vent terminals.
Instructions for flue installation.
How to connect multiple units for increased capacity.
Settings for installing the appliance at high altitudes.
Detailed procedure for high altitude installation settings.
Recommended locations for installing temperature controllers.
Possible combinations of Rinnai temperature controllers.
Specifications for temperature controller cables.
Step-by-step guide for mounting the temperature controller.
Critical safety warnings and procedures before operating the unit.
Step-by-step guide for operating the water heater.
Procedure for safely turning off the gas supply to the appliance.
Graph showing pressure drop versus water flow rate.
Data on water flow rate based on temperature rise.
Information specific to using the appliance for space heating.
Physical dimensions of the water heater models.
Electrical schematic of the appliance.
Important notices regarding installation regulations.
Specific requirements for Massachusetts, including CO detectors and signage.
Requirements for installing carbon monoxide detectors.
Information on how to record purchase and installation details.
Details of the product's warranty coverage and duration.
Further warranty details, service, and exclusions.
