A
Amy ThompsonJul 31, 2025
What to do if I smell gas from Rinnai RHFE-431WTA Wall Furnaces?
- KKevin Gamble Jr.Jul 31, 2025
If you smell gas from your Rinnai Wall Furnace, it requires a service call.
To Next PageTo Next PageWhat to do if I smell gas from Rinnai RHFE-431WTA Wall Furnaces?
If you smell gas from your Rinnai Wall Furnace, it requires a service call.
How to fix Rinnai RHFE-431WTA Wall Furnaces unusual combustion?
If you experience unusual combustion with your Rinnai Wall Furnace due to air in the gas pipe (during initial installation), purge the air.
What to do if gas is turned off at meter for Rinnai Wall Furnaces?
If the gas is turned off at the meter for your Rinnai Wall Furnace, turn the gas on.
General| Brand | Rinnai |
|---|---|
| Model | RHFE-431WTA |
| Category | Wall Furnaces |
| Language | English |
Automatically shuts unit down when there is an abnormal spark at time of ignition.
Activated when burner flame fails, preventing raw gas release.
Cuts off gas if heater exceeds predetermined temperature, usually due to obstruction or blocked fan filter.
Emphasizes conforming to local codes and standards for proper installation.
Provides detailed specifications including BTU/h, clearances, fan CFM, and operational modes.
Warns about aerosols and keeping flammable materials like curtains away from the heater.
Stresses that installation and service must be performed by a qualified service person.
Details grounding requirements and warnings about using extension cords for power supply.
Specifies requirements for gas supply lines, shut-off valves, flexible pipes, and thread compounds.
Provides a detailed table of required clearances from the vent terminal to various building elements for US and Canadian installations.
Highlights warnings about pilotless ignition, smelling for gas, and using tools on controls.
Guides on accessing the control panel and setting the current time and day of the week.
Explains how to turn the heater on and off manually, including setting room temperature.
Guides on activating timer mode, selecting days, and setting start times for timer periods.
Continues step-by-step example for programming weekday timer periods and temperatures.
Guides on programming weekend periods and details the factory pre-set program.
Step-by-step guide to operate the heater using programmed weekly timers in Auto mode.
Explains how to activate/deactivate the override function to temporarily change timer settings.
Provides guidance on troubleshooting common faults and when to contact service.
Lists checks for common problems related to ignition and during combustion.
A table listing common causes and their remedies for various operational problems.
Lists error codes displayed on the panel, their faults, and recommended remedies.
Recommends annual cleaning, visual flame checks, and maintenance of motors and vent systems.
