To Next PageTo Next Page
Need help?Do you have a question about the Rinnai RUCS65i and is the answer not in the manual?
General| Type | Tankless Water Heater |
|---|---|
| Flow Rate @ 35°F Rise | 6.5 GPM |
| Flow Rate @ 45°F Rise | 5.1 GPM |
| Flow Rate @ 70°F Rise | 3.3 GPM |
| Maximum BTU Input | 150, 000 BTU/h |
| Temperature Range | 98°F - 140°F |
| Electrical Requirements | 120 VAC |
| Warranty | 12 years on heat exchanger, 5 years on parts, 1 year on labor |
| Fuel Type | Natural Gas |
| Vent Size | 3" or 4" |
Essential safety practices for operating and maintaining the water heater.
Required skills and training for professional installation.
Key DO NOT and MUST DO guidelines for installation.
List of sequential steps for installing the water heater.
Factors for choosing the right installation site.
Impact of water quality and air quality on the unit.
Required clearances for indoor vent terminations.
Required clearances for outdoor vent terminations.
Specific clearance rules for different vent configurations.
Minimum clearances around the unit for service and operation.
Measures to protect the unit and water lines from freezing.
List of certified vent system components and suppliers.
Rules for proper venting and determining configuration.
Specific requirements for PVC/CPVC vent systems.
How to calculate total equivalent vent length.
Instructions for managing condensate and preventing damage.
Checklist for ensuring proper venting and condensate management.
Installation and maintenance of the pressure relief valve.
Recommended isolation valves and piping requirements.
Detailed instructions for PRV installation and annual checks.
Procedures for connecting the gas supply safely.
Guidance for sizing gas pipes based on demand and codes.
Electrical requirements, grounding, and power sources.
Setting DIP switches for altitude and vent length.
How to install, locate, and wire temperature controllers.
Using the optional controller for temperature selection and settings.
A comprehensive checklist before final unit operation.
Key performance data, dimensions, and electrical information.
Key safety information and general facts about the water heater.
Safe operating procedures and emergency actions.
How to adjust the water temperature and associated safety warnings.
Codes displayed on the unit and their meanings.
Troubleshooting steps for common error codes.
Cleaning, vent inspection, motor care, and controller cleaning.
Procedure for removing lime/scale buildup from the heat exchanger.
Measures to protect the unit and water lines from freezing.
Practices for preparing the unit for cold weather.
Steps for draining the water heater for storage or freezing prevention.
Specific installation requirements for Massachusetts.
Part numbers and illustrations for common replacement components.
Details on warranty coverage, duration, and claims process.
Conditions and issues not included in the warranty coverage.
