Facial Steamer (SUFA2)
After use
STEP 1 Turn the unit off by pressing the power button and remove the
mains plug from your power supply. Allow the unit to cool for 30
minutes.
STEP 2 Remove the water chamber, unscrew the cap and pour water
out. Note: Ensure that you have emptied any water from the water
inlet.
STEP 3 Open the water chamber plug on the base of the unit and pour
out any remaining water.
STEP 4 Re-attach the cap and push the water chamber fully back into
the water inlet.
How To Use
To Next Page
Loading...
