Facial Steamer (SUFA2)
Instructions for use
STEP 1 Adjust the angle of the mist nozzle to direct the steam onto the
desired area of your face during treatment. NOTE: The mist nozzle only
adjusts up and down and not side to side.
STEP 2 Insert the mains plug into your power supply and turn on the
power button, the indicator light will illuminate red. NOTE: The steamer
will take approx 1 minute to heat up before any steam
is produced.
STEP 3 Place your face no closer than 10cm away from the mist nozzle.
NOTE: We recommend five treatments per
week, each treatment lasting no longer
than ten minutes.
STEP 4 To finish rinse your face with cold
water and pat dry.
How To Use
To Next Page
Loading...
