Riobel R51 - User Manual

Thread Seal Tape
Ruban d’étanchéité pour
joints filetés
Cinta de teflón
Flathead Screwdriver
Destornillador de punta chata
Tournevis à tête plate
R51 Type P (Pressure Balance) Rough
R51, Brut de valve Type P (pression équilibrée)
Válvula R51 Tipo P (con balance de presión)
HELPFUL TOOLS
For safety and ease of installation, the use of
these helpful tools is recommended.
OUTILS UTILES
Pour des raisons de sécurité et de facilité
d’installation, l’utilisation de ces outils utiles
est recommandée.
HERRAMIENTAS ÚTILES
Por seguridad y facilidad de instalación, se
recomienda el uso de estas útiles
herramientas.
Safety Glasses
Lunettes de sécurité
Gafas de seguridad
A DISTINCTIVE MEMBER OF THE HOUSE OF ROHL
UN MEMBRE DISTINCTIF DE HOUSE OF ROHL
MIEMBRO DISTINTIVO DE LA FAMILIA HOUSE OF ROHL
INS-51-ROUGH-REV00
Adjustable Wrench
Clé adjustable
Llave ajustable
INSTRUCTION MANUAL
MANUEL D’INSTRUCTIONS
MANUAL DE INSTRUCCIONES

Summary

R51 Type P Pressure Balance Rough Valve Installation Guide

Helpful Tools for Installation

Lists recommended tools for safe and easy installation of the valve.

Parts Identification and Preparation

Component Parts List

Identifies all components included with the R51 Type P rough valve.

Old Faucet Removal Precautions

Provides essential safety tips for removing an old faucet before installation.

Wall Mounting Requirements

Standard Wall Installation

Illustrates installation requirements for standard wall types.

Acrylic Wall Installation

Illustrates installation requirements for acrylic wall types.

Pipe Connection Procedures

Thread Seal Tape and NPT Connections

Applying thread seal tape to valve threads for NPT connections.

Soldering, PEX, and CPEX Pipe Connections

Connecting pipes via soldering, PEX, or CPEX expansion methods.

Valve Operation and Final Assembly

Opening Service Valves

Details on rotating service valves to the open position using a screwdriver.

Installing Plaster Ground and Cover

Guidance on fitting the plaster ground and valve cover onto the main valve.

Leak Check and Pressure Capping

Procedure for checking for leaks and capping outlets to maintain pressure.

Water Supply Configuration

Bath Spout Water Inlet Alignment

Ensures proper alignment of water inlets for bath spouts.

Accepted Water Inlet Pipe Types

Specifies compatible pipe materials like copper and PEX for water inlets.

Warranty and Customer Support

Limited Warranty Details

Details the limited warranty against manufacturing defects for products and parts.

Finish Care and Maintenance Instructions

Provides instructions for cleaning and maintaining the product's finish.

Customer Support Contact Information

Offers contact details for customer support and service inquiries.

Riobel R51 Specifications

General

Brand	Riobel
Model	R51
Category	Plumbing Product
Language	English