This document describes the Rip Curl Search GPS 2 watch, a device designed for surfers and outdoor enthusiasts, offering a range of functions tailored to tracking and managing time, tides, and activities.
Function Description
The Rip Curl Search GPS 2 watch is primarily a pre-programmed tide watch with Spot-X averaging tide capabilities. Beyond tide information, it integrates several other essential functions:
- Timer: A countdown timer for various activities.
- Chronograph (Stopwatch): For measuring elapsed time, including lap times.
- Alarm: A programmable alarm function.
- Light: A backlight for visibility in low-light conditions.
- DST (Daylight Saving Time): Automatic adjustment for daylight saving time.
- Power Save: A feature to conserve battery life.
The watch's core functionality revolves around providing accurate tide data, which is crucial for surfing. The "pre-programmed tide" feature means that tide information for numerous locations is already stored in the watch. The "Spot-X averaging tide" likely refers to a more advanced tide calculation that averages data from specific "spot" locations to provide more localized and precise tide predictions.
Usage Features
The watch is operated through a combination of three buttons: "LIGHT," "MODE (SET)," "UP (START/STOP)," and "DOWN (LAP/RESET)." The display shows the day, date, time, and a graphical representation of the tide.
Setting Time & Date:
- Ensure the watch is in TIME mode.
- Press and hold the "MODE" button for 2 seconds to enter setting mode.
- Use "UP" to increase values and "DOWN" to decrease them.
- Press "MODE" to set a value and advance to the next setting.
- Adjust HOUR, MINUTE, SECONDS, YEAR, MONTH, DAY/DATE, DATE FORMAT, 12/24hr, and units (FEET or METERS).
Setting Tide:
- Press "MODE" to view the menu.
- Use "UP" and "DOWN" to scroll to the "TIDE" menu.
- Press "MODE" to select Tide Mode.
- Wait for the "Beach Name" to stop scrolling, then hold "MODE" for 3 seconds to enter beach settings.
- Use "UP" and "DOWN" to toggle through Regions, Country, and Beach.
- Once the correct field is found, press "MODE" to set.
Setting Spot X Tide:
- Obtain the current tide at your desired location from a reliable source.
- During the tide setting procedure, scroll to the bottom regions and select the "SPOT X" location.
- Follow the watch prompts to set your location's high tide for the current day.
Tip: At the start and end of DST season, use the DST function to correct current time and tide.
Daylight Savings Time (DST):
- Ensure the watch is in TIME mode.
- Hold the "UP" button for 5 seconds. The watch will automatically adjust to Daylight Savings Time, and a DST icon will appear in the bottom left corner.
Chronograph (Stopwatch):
- Press "MODE" and toggle "UP/DOWN" until "CHRONO" is displayed.
- Press "MODE" to select Chrono Mode.
- Press "UP" to START/STOP the stopwatch.
- Press "DOWN" to record LAP times while the chronograph is running.
- To reset, stop the chronograph by pressing "UP," then hold "DOWN" for 3 seconds.
Timer (Countdown Setting):
- Press "MODE" and toggle "UP/DOWN" until "Timer" is displayed.
- Press "MODE" to select Timer Mode.
- Press "UP" to start or stop the timer.
- To reset, stop the timer by pressing "UP" and hold "DOWN" for 2 seconds.
Adjusting Timer:
- Hold "MODE" for 3 seconds. The hour digit will flash.
- Use "UP" and "DOWN" to select the desired hour, then press "MODE" to set.
- Repeat the process for minutes and press "MODE" to set.
Alarm:
- Press "MODE" and toggle "UP/DOWN" until "Alarm" is displayed.
- Press "MODE" to select Alarm Mode.
- Hold "MODE" for 3 seconds to enter alarm settings. The hour digit will flash.
- Use "UP" and "DOWN" to select the desired hour, then press "MODE" to set.
- Repeat the process for minutes and press "MODE" to set the alarm.
- Press "UP" or "DOWN" to turn the alarm icon (•)) on or off.
Power Save:
- In TIME mode, press "DOWN" for 10 seconds to turn off the watch.
- Press any button to wake up the watch.
Maintenance Features
The manual does not explicitly detail maintenance features such as battery replacement or water resistance ratings. However, the "Power Save" function can be considered a maintenance feature as it helps prolong battery life. Given its intended use for surfing, it is implied that the watch possesses a degree of water resistance, though specific depth ratings are not provided in this excerpt. Users should consult the full product manual or Rip Curl's official website for detailed specifications on water resistance, battery type, and recommended service intervals.
Need help?
To Next Page
General
