Riptide R1 - Charging the Electric Skateboard; Charging the Remote Control

!
15
12) Charging the Board
ONLY USE A RIDERIPTIDE CHARGER as incorrect
chargers may be a serious fire hazard. See Page 16 for
details.
13) Charging the Remote
Use the included Micro-USB cord.
When the Remote is charging
properly an LED will turn red
under where the lanyard
connects. This LED will turn
off when the Remote is
fully charged.
When properly
charging the LED
on the charger will
turn red.
When charging is
complete this LED
will turn green.