Risco Agility USB RS232 User Manual

ȱȬ1Ȭ
ȱ
USB Adaptor
Quick Installation Guide
EN
General
TheȱUSBȱ232ȱadaptorȱconvertsȱdataȱbetweenȱtheȱUSBȱprotocolȱandȱRISCOȱGroupȇsȱAgilityȱpanelȱusingȱtheȱ
suitableȱlocalȱbusȱadaptorȱ(supplied).ȱ
Hardware and Software Installation
1. InsertȱtheȱUSB232BȱSetupȱCDȱ(supplied)ȱintoȱyourȱcomputerȱCDȬROMȱdrive.ȱȱ
2. ConnectȱtheȱUSB232BȱconverterȱtoȱyourȱPC’sȱUSBȱport.ȱTheȱsetupȱprogramȱwillȱbeginȱtoȱrunȱ
automatically.ȱ
Note:ȱȱ
WhenȱusingȱWindowsȱXPȱselectȱtheȱNo,ȱnotȱthisȱtimeȱoptionȱfromȱtheȱFoundȱNewȱHardwareȱWizardȱandȱclickȱtheȱNextȱ
button.ȱOnȱotherȱMicrosoftȱWindowsȱoperatingȱsystemsȱ(Winȱ98,ȱ2000,ȱNT)ȱproceedȱtoȱStepȱ3.ȱ
3. SelectȱInstallȱfromȱaȱlistȱofȱspecificȱlocationȱandȱclickȱtheȱNextȱbutton.ȱ
4. SelectȱSearchȱremovableȱmediaȱandȱclickȱtheȱNextȱbutton.ȱ
5. Windowsȱhasȱfinishedȱinstallingȱtheȱhardware.ȱClickȱtheȱFinishȱbutton.ȱ
6. Onceȱdoneȱwithȱtheȱinstallationȱofȱtheȱhardware,ȱyouȱwillȱbeȱpromptedȱtoȱcompleteȱthe
ȱinstallationȱ
ofȱtheȱsoftwareȱaccordingȱtoȱtheȱfollowingȱstepsȱ(seeȱtheȱaboveȱnoteȱifȱyouȱareȱusingȱWindowsȱXPȱ
operatingȱsystem):ȱ
a. SelectȱInstallȱfromȱaȱlistȱofȱspecificȱlocationȱandȱclickȱtheȱNextȱbutton.ȱ
b. SelectȱSearchȱremovableȱmediaȱandȱclickȱtheȱNextȱbutton.ȱ
c. Windowsȱhasȱfi nishedȱinstallingȱ
theȱsoftware.ȱClickȱtheȱFinishȱbutton.ȱ
7. MakeȱsureȱtheȱDriverȱSoftwareȱinstallationȱisȱaccomplishedȱaccordingȱtoȱtheȱfollowing:ȱ
a. ConnectȱtheȱUSB232BȱunitȱintoȱtheȱUSBȱportȱofȱtheȱcomputerȱandȱthenȱclick:ȱȱ
Startȱ
Æ
ȱSettingsȱ
Æ
ȱControlȱPanelȱ
Æ
ȱSystemȱ
Æ
ȱHardwareȱ
Æ
ȱDeviceȱManagerȱ
b. Verifyȱthatȱthe
ȱUSBȱSerialȱPortȱisȱlistedȱatȱPortsȱ(COMȱ&ȱLPT).ȱ
8. ChangingȱtheȱCOMȱPortȱSettings:ȱ
a. FromȱDeviceȱManager,ȱselectȱtheȱUSBȱserialȱportȱCOMȱoption.ȱ
b. ChooseȱtheȱPortȱSettingsȱtab,ȱandȱthenȱclickȱAdvanced.ȱȱ
c. UnderȱtheȱBMȱoptions,ȱchoose
ȱLatencyȱTimer.ȱSetȱtheȱtimerȱtoȱ[1]ȱandȱclickȱtheȱOKȱ
button.ȱ
9. Rebootȱyourȱsystem.ȱ
USB LED Indications
LEDȱ TurnsȱONȱwhen:ȱ
Linkȱ
TheȱUSBȱRS232ȱisȱreadyȱforȱuseȱ
TXȱ
DataȱisȱbeingȱsentȱfromȱtheȱUSBȱportȱtoȱtheȱpanelȱ
RXȱ
DataȱisȱbeingȱsentȱfromȱtheȱpanelȱtoȱtheȱUSBȱportȱ
USB Wiring
Note:ȱȱ
ToȱenableȱlocalȱcommunicationȱsetȱtheȱBaudȱRateȱtoȱ38400,ȱDataȱBitsȱtoȱ8,ȱParityȱtoȱNone,ȱStopȱbitsȱtoȱ2ȱandȱHandshakeȱ
toȱNoneȱinȱtheȱAgilityȱConfigurationȱSoftwareȱunderȱtheȱCommunicationÆConfigurationȱmenu.ȱForȱmoreȱinformationȱ
referȱtoȱtheȱAgilityȱConfigurationȱSoftwareȱManual.ȱ

Risco Agility USB RS232 Specifications

General

Brand	Risco
Model	Agility USB RS232
Category	Wireless Router
Language	English

Summary

Hardware and Software Installation

Initial Installation Steps

Insert CD, connect converter, and follow Windows prompts for installation.

Driver Software Verification

Verify the USB Serial Port is listed in Device Manager.

COM Port Settings Configuration

Adjust Latency Timer settings for the USB serial port.

System Reboot

Restart the system after installation is complete.

USB LED Indications

LED Status and Meaning

Explains when the Link, TX, and RX LEDs turn on.

USB Wiring Diagram

Local Communication Configuration

Details Baud Rate, Data Bits, Parity, Stop bits, and Handshake settings.

RISCO Group Limited Warranty

Contacting RISCO Group