To Next PageTo Next Page
Need help?Do you have a question about the Risco WL T312 and is the answer not in the manual?
General| Brand | Risco |
|---|---|
| Model | WL T312 |
| Category | Accessories |
| Language | English |
Overview of the WL T312 detector, its signal processing, and compatibility with RISCO systems.
Guidelines for optimal installation height, orientation, and placement for reliable detection.
Advice on avoiding false alarms in specific environments like reflective surfaces or moving objects.
Step-by-step guide for mounting the detector onto a wall surface using provided knockouts.
Instructions on repositioning the tamper switch and wiring it for enhanced security.
Explanation of DIP switch functions for configuring operation modes, sensitivity, and RF power.
Guide on how to adjust the detector's detection range by moving the internal PIR sensor.
Steps for performing a walk test to verify detector functionality and coverage.
Understanding LED indicators and detector operational modes (Normal, Test, Enroll).
How to enroll the detector with the system's receiver by writing its coded message.
Instructions for mounting the detector using an optional swivel bracket for adjustable positioning.
Procedure for safely removing and replacing the detector's lenses and protective sleeve.
Detailed electrical, physical, and environmental specifications for the WL T312 detector.
Information on product model numbers, descriptions, and available accessory kits.
