Rishabh Rish Eine - Auto Scrolling Screen Selection

X1000
L1
L2
L3
V
X1000
L1
L2
L3
A
RMS
TRUE
Current transformer Secondary confirmation screen:
When " " down key is pressed , set message screen will
appear, if again down key is pressed value is accepted.
If CT secondary value is to be edit once again,pressing " " up
key user can scroll between ''5'' for CT secondary 5A and "1"
for CT secondary 1A.
Pressing " " key will accept displayed value and advance to
auto scroll selection menu in case of Eine 3A and it will exit
from set up in case of Eine A and goes to measurement
screen.
3.1.6 Selection of Auto Scrolling or fixed Screen (only for 3V/3A)
Pressing the “ ” key will enter into Screen selection
Confirmation screen.
Pressing the “ ” key will scroll between “Yes” and “No”.
Select “Yes” for Auto scrolling of parameter display and Select
“No” for fixed display screen.
Pressing the “ ” key will accept the display value and exit from
set up and enter into measurement mode.
X1000
L1
L2
L3
V
X1000
L1
L2
L3
A
RMS
TRUE
Pressing the “ ” key set the selected option and Exit set up
with entering into measurement mode.
Auto / Fixed Screen Confirmation
Pressing the “ ” key re-enter Screen selection menu.
X1000
L1
L2
L3
V
X1000
L1
L2
L3
A
RMS
TRUE
10