To Next PageTo Next Page
Need help?Do you have a question about the Ritelite K9 30 LED and is the answer not in the manual?
General| Brand | Ritelite |
|---|---|
| Model | K9 30 LED |
| Category | Work Light |
| Language | English |
Simple operation guide for the K930ALED, including on/off switch and default brightness.
Instructions on charging the K9 30 LED, battery care, and charging environment.
Describes setting up the unit in torch mode and worklight mode with adjustable height.
Information on using twin sockets for charging, running the light, or powering other devices.
Explains the unit's design for harsh environments and temperature monitoring.
Identifies the buttons (ON/OFF, MODE, BRIGHTNESS, SELECT) and their functions.
Details the function of each button: ON/OFF, MODE, BRIGHTNESS, SELECT.
Explains how to combine different modes, brightness, and channels for varied light options.
Describes the retractable vari-focus system for adjusting the beam from spot to flood.
Illustrates how to adjust the beam focus using control knobs for spot to flood light.
Instructions for setting the unit to flash LEDs in SOS or continuous flashing sequences.
Details the battery status indicators: LED colour, audible bleeps, and LED flashing.
Details the 30 high power LEDs, bespoke lens array, and variable focusing system.
Describes the fold-out legs that create a tripod system for stability.
Information on optional poles to extend light head height from 820mm to 1800mm.
Details the optional remote system for controlling multiple units via mesh networking.
Explains the system that automatically signals units to switch on during mains failure.
Describes the optional system for charging from 12/24V vehicle DC systems.
Explains the built-in Miniature Circuit Breaker for overload protection and reset.
Details the use of high impact polymers and stainless steel for durability.
How to use quicklok extension poles to increase the lamp head height.
Details the multi-colour LED indication and self-test process for VEPAC charging.
Explains the system preventing over-discharge of the vehicle's battery.
Describes remote operation up to 100m and checking unit battery status.
Explains Zigbee mesh networking for controlling multiple units and extending range.
Details the system that automatically switches units on during a mains failure.
Advice on fully recharging and disconnecting before storing the unit for up to 6 months.
Recommends exterior cleaning and contacting Ritelite for technical assistance.
Advises contacting the point of purchase for correct recycling of components.
Troubleshooting steps for when the light does not power on or flickers.
Troubleshooting for external battery chargers not recharging the battery.
Diagnoses for internal charger issues like no LED indication or rapid flashing amber.
Details CE conformance, IP54 rating for dust and water protection.
States FCC compliance for the optional remote transmitter module.
Details lamp type, colour temperature, lumen output, LED life, battery, power consumption.
Lists operating modes and describes the variable intensity focusing system.
Provides run times for different brightness levels and recharging times for chargers.
Specifies nominal voltage, protection, weight, and dimensions.
Lists available optional extras like chargers, poles, and control modules.
Key safety points: read manual, use approved chargers, ensure ventilation, avoid staring into light.
Notes that there are no user serviceable parts and servicing must be done by qualified persons.
