Need help?Do you have a question about the ritm Contact GSM-5-2 and is the answer not in the manual?
Lists various enabled communication channels including GSM GPRS, CSD, DTMF, SMS, LAN, and PSTN.
Recommends mobile operator plans and outlines SIM card selection and installation procedures.
Details panel power supply requirements and step-by-step installation and connection procedures.
Introduces the setup utility and covers Global Settings like Object #, Master key, and GSM signal.
Explains customizable events like Autotests, 220V failure/recovery, and non-customizable events.
Configures GPRS APN access, server settings, and communication channel types and setup.
Details zone properties, resistive loop settings, and dry contact loop configuration.
Defines area types, configuration, states, siren settings, and event transfer limits.
Details temperature sensor support, readings, and setting alarm conditions for temperature changes.
General| Number of security zones | 5 |
|---|---|
| Communication channel | GSM |
| Humidity | Up to 95% (non-condensing) |
| Number of Relays | 2 |
| Number of Inputs | 5 |
| Power supply voltage | 12V DC |
| Input Voltage | 12V DC |
| GSM Module | GSM 900/1800 MHz |
| SIM Card | Mini-SIM |
To Next Page
