To Next PageTo Next Page
Need help?Do you have a question about the Rittal SK 3304.540 and is the answer not in the manual?
General| Model | SK 3304.540 |
|---|---|
| Power Supply | 230 V |
| Frequency | 50/60 Hz |
| Refrigerant | R134a |
| Protection Class | IP54 |
| Weight | 22 kg |
Details about associated documents, including paper and PDF formats.
Information regarding the CE declaration of conformity supplied with the unit.
Guidance on the importance of retaining all product documentation for the operator.
Explanation of symbols indicating safety instructions, warnings, and notes.
Key safety guidelines for assembly, operation, and maintenance, including warnings and precautions.
Details how the cooling unit operates, its components, and control systems.
Describes protective features like pressure switches and thermal winding shields.
Explains how condensation is handled and evaporated within the unit.
Covers the function and maintenance of filter mats for condenser protection.
Explains the function of the door limit switch for preventing condensation.
Details the serial interface for higher-level monitoring systems.
Outlines correct application and limitations to prevent damage or injury.
Lists the items included in the product packaging.
Guidelines for choosing an appropriate location for the cooling unit installation.
General guidance and layout of electronic components within the enclosure.
Procedures for external, partial, and full internal mounting of the unit.
Instructions for connecting the condensate drain hose.
Critical information on connection data, overvoltage, and electrical safety.
Steps for carrying out electrical installation, including bus and serial connections.
Steps to complete the assembly, including filter installation and unit fitting.
How to operate the unit using the basic controller, including display and settings.
Detailed operation using the comfort controller, parameters, and system messages.
Procedure to reset the comfort controller after specific faults occur.
Routine checks, cleaning, and maintenance intervals for the cooling unit.
Proper procedures for storing and disposing of the cooling unit and its components.
Key technical data including voltage, current, cooling capacity, and dimensions.
Diagrams and part numbers for identifying and ordering spare components.
Detailed dimensions and cut-out sizes for external installation.
Detailed dimensions and cut-out sizes for partial internal installation.
Detailed dimensions and cut-out sizes for full internal installation.
