To Next PageTo Next Page
Need help?Do you have a question about the Rittal SK 3304.510 and is the answer not in the manual?
General| Model | SK 3304.510 |
|---|---|
| Frequency | 50/60 Hz |
| Refrigerant | R134a |
| Global Warming Potential (GWP) | 1430 |
| Protection category to IEC 60 529 External circuit | IP 34 |
| Design | Wall-mounted |
| Weight | 13.8 kg |
Information on associated assembly and installation documents.
Details regarding the CE declaration of conformity.
Guidance on keeping and passing on documentation.
Explanation of symbols used throughout the manual.
General safety precautions for assembly and operation.
Explanation of the cooling unit's function and components.
Description of safety features like pressure switch and thermal protection.
Explanation of condensation formation and its management.
Information on filter mats and their monitoring.
Details on the door limit switch function and its impact.
Guidelines for selecting an appropriate installation location.
General steps and precautions for assembling the unit.
Instructions for mounting the cooling unit externally, partially, or fully internally.
Steps for connecting the condensate drain hose.
Important considerations for electrical connections.
Steps for performing the overall electrical installation.
Final steps before commissioning the unit.
How to operate the unit using the Basic controller.
Understanding the LED indicators and status display.
How to activate and use the Basic controller test mode.
Procedure for adjusting the temperature setpoint.
How to operate the unit using the e-Comfort controller.
Explanation and use of the energy-saving eco-mode.
List and description of adjustable parameters.
Setting up system messages for monitoring.
Configuring units for master-slave communication.
Procedure for resetting the e-Comfort controller.
Overview of the cooling unit's maintenance-free design and basic checks.
Instructions for cleaning components using compressed air.
Specific compressed air cleaning steps for certain models.
Guidelines for storing and disposing of the cooling unit.
Detailed technical data and specifications of the cooling units.
Identification of spare parts for various models.
Dimensions and cut-out sizes for external mounting.
Dimensions and cut-out sizes for partial internal mounting.
Dimensions and cut-out sizes for full internal mounting.
