To Next PageTo Next Page
Need help?Do you have a question about the Rittal SK 3305. series and is the answer not in the manual?
General| Brand | Rittal |
|---|---|
| Model | SK 3305. series |
| Category | Air Conditioner |
| Language | English |
Details of accompanying assembly and operating instructions.
Information regarding the declaration of conformity supplied with the unit.
Requirements for keeping instructions and associated product documents.
Explanation of symbols for instructions, danger, caution, and notes.
Essential safety precautions for assembly, installation, and servicing by trained specialists.
Explanation of how the enclosure cooling units dissipate heat and protect components.
Details of safety features like pressure-operated switch and thermal winding shields.
Explanation of condensation formation and automatic evaporation processes.
Information on filter mats, their function, and monitoring.
Functionality and connection of the optional door limit switch.
Information on connecting an additional interface card for higher-level monitoring.
Guidelines for correct use of cooling units and manufacturer liability.
List of items included in the packaging unit for completeness check.
Criteria for selecting an appropriate installation location for the enclosure.
General guidelines for checking packaging and preparing for assembly.
Proper arrangement of components within the enclosure for airflow and climate control.
Options and methods for mounting the cooling unit externally, partially, or fully internally.
Instructions for connecting the condensate discharge hose for specific unit types.
Important regulations and precautions for qualified electricians performing installation.
Steps for performing the electrical installation, including bus connection.
Completing the electrical installation and connecting system message relays.
Steps to complete assembly before initial startup and operation.
Operating the cooling unit using the Basic controller interface.
Understanding the status indications provided by the green and red LEDs on the Basic controller.
How to activate test mode to run the cooling unit independently of settings.
Procedure for adjusting the temperature setting using the potentiometer.
Steps to reset the controller after an alarm condition has been rectified.
Operating the cooling unit using the Comfort controller interface.
Supported voltages, features, master-slave function, and display information for Comfort controllers.
Procedure to activate the test mode for the Comfort controller unit.
Overview of parameter adjustment and interaction with the Comfort controller display.
Details on programmable parameters, their ranges, and factory settings.
Visual guide illustrating the sequence for programming various parameters on the Comfort controller.
How system messages are displayed and can be evaluated via relays.
Configuring identifiers for master and slave units in a network.
Interpreting system messages and required reset procedures.
Procedure to reset the Comfort controller after specific fault messages occur.
Overview of the maintenance-free design and cleaning recommendations.
Instructions for cleaning external air circuit components using compressed air.
Guidelines for upright storage, temperature limits, and environmental disposal.
Key technical data found on the unit's rating plate for connection and operation.
Exploded views illustrating spare parts for various RITTAL cooling unit models.
Detailed dimensional drawings for external installation of cooling units.
Detailed dimensional drawings for partial internal mounting of cooling units.
Detailed dimensional drawings for full internal mounting of cooling units.
