Need help?Do you have a question about the Riva RC6602HD-5311 and is the answer not in the manual?
General| Frame Rate | Up to 30fps |
|---|---|
| Night Vision | Yes |
| Resolution | 1920 x 1080 |
| Video Compression | H.264 |
| Audio Compression | G.711 |
| Protocols | TCP/IP, HTTP, RTSP, DHCP, DNS, DDNS, NTP, UPnP, SMTP |
| Weather Resistance | Yes |
| Storage | MicroSD card |
Positions the sunshield to prevent direct sunshine.
Controls LEDs, OSD menus, and video output; includes reset button.
Helps reduce temperature difference and prevent water condensation.
Adjusts camera position. Refer to Installation section for details.
Used for panning adjustment. Refer to Installation section.
Used for tilting adjustment. Refer to Installation section.
Details pinout for DI/DO connection: A: DO-, B: DO+, C: DI+, D: DI-.
Requires DC 12V for power supply.
RJ45 LAN connector for network connection.
Connects to audio input devices like a microphone.
Connects to audio output devices like amplifier speakers.
Details pinout for DI/DO connection: A: DO-, B: DO+, C: DI+, D: DI-.
Connects 1-channel D/I to voltage or relay sensors, selectable by software.
Supports relay type alarm output. Rating: Max 24VDC 50mA.
Requires a 12V DC power connector.
Uses RJ45 LAN for 10/100 Base-T Ethernet connection.
Details default IP address and MAC address conversion for network setup.
Uses IPAdminTool to manage network products and modify IP addresses.
Instructions for viewing live streaming video via web browser, including ActiveX.
Steps to view video streams using IPAdminTool, requires ActiveX for IE.
Instructions for resetting the device to its previous settings.
Procedure to reset all parameters, including IP address, to factory defaults.
To Next Page
