-5-
BEFORE USE
IMPORTANT: Always add liquid before operating the fountain. If running
while empty, excessive noise (and possible motor damage) will result.
1. Remove all black foam packing rings from the bottom of the
BOWL. (See Figure. 2)
2. Wash all parts EXCEPT the BASE (see CLEANING & MAINTENANCE).
1. Align the BOWL over the BASE so the VALVE fits into the WATER
PUMP INPUT and the other 4 notches align. Press firmly to secure
BOWL into BASE (if BOWL is not attached to the BASE correctly,
leakage may occur).
NOTE: DO NOT LIFT PRODUCT HOLDING THE BOWL; ONLY LIFT
PRODUCT BY SECURELY HOLDING THE BASE.
2. Align the INNER TUBE over the WATER PUMP OUTLET on the
center of the BOWL (it only fits one way.)
PARTS AND ASSEMBLY
B
C
D
E
F
G
A
A. Base
B. Water Pump Input
C. Bowl
D. Valve
E. Notches
F. Water Pump Outlet
G. Inner Tube
H. Outer Tube
I. Large Tier
J. Medium Tier
K. Small Tier
L. Spouts
M. Flow Collar
N. Stems
-4-
Figure. 1
I
H
J
K
L
Align
Figure. 2
ASSEMBLING THE BEVERAGE FOUNTAIN
N
M
Create a beautiful centerpiece that is sure to capture the attention of
every guest at your next get-together.
The Rival
™
Beverage Fountain is easy to assemble and holds up to 2
1
/2
gallons of your favorite party beverage during operation. Simply add the
prepared beverage directly into the bowl and watch as the liquid flows
up the tower and then cascades down through each of the three tiers,
creating a centerpiece ready for your guests to enjoy!
The white light enhances the stunning ambience created by your Rival
™
Beverage Fountain.
You may also add ice to the bowl and garnish your punch with frozen or
fresh fruit such as orange or lemon slices, strawberries, or raspberries.
The Rival
™
Beverage Fountain is also the perfect party companion to the
Rival
™
Chocolate Fountain.
FEATURES AND BENEFITS
Figure. 3
M
To Next Page
Loading...