32
1. Before starting to charge, ensure that the wall socket has
been set up correctly and that the PRCD has been tested.
2. Park the vehicle on the stand and open the Charger Lid.
3. Plug the charger into the wall outlet.
4. Turn on the MCB for the wall outlet and ensure that the LED
on the PRCD and charger unit turns on. The LED on the
charger unit should be blinking red.
5. Plug the charger gun into the charger inlet. When plugged in
properly, you should hear a latching sound.
6. Wait for a few seconds and the instrument cluster should
turn on and show the charging symbol as well as the current
available charge on the Indie.
7. After a moment, the estimated charging time will be
indicated on the instrument cluster.
Plugging in for charge
River Indie User Manual | Charging the Indie
To Next Page
Loading...