River INDIE - Portable Charger

31
PRCD
PRCD (Portable Residual Current Device) is a protection device
installed along with your charger to prevent an electrical shock
in the event of bad grounding/earth connection. The PRCD
should always be tested before using the charger by following
these steps:
1. To use the charger, plug in the PRCD plug to the installed
wall outlet.
2. Turn on the MCB for the wall outlet. As the charger is
powered, a red light should glow on the PRCD.
3. Press the test button on the PRCD and the red light should
go away along with a clicking sound.
4. Press the reset button on the PRCD and the light should turn
back on.
1. Charger Unit
2. Charger Gun
3. PRCD
Depending on the provided charger and environmental
conditions, the charging time may vary. The computed charging
time is indicated on the instrument cluster and the River App.
Part Identification - Charger
The portable charger provided with Indie consists of a charger
unit, charging gun and the PRCD plug. These are provided in a
storage bag along with the vehicle.
Portable charger
WARNING
If the red light on the PRCD doesn’t turn off when the
test button is pressed, please stop using the charger
immediately and contact River Mobility or an authorised
service centre.
03 02
01
River Indie User Manual | Charging the Indie