76
TPMS Sensor Automatic Learning Process
The vehicle is equipped with TPMS sensors in the valve stem of each wheel. When
you start driving, the sensors automatically connect to the TPMS module and begin
the automatic learning process, which takes less than 10 minutes. After the learning
process is complete, the TPMS sensor transmits the pressure values for each of the
front and rear tires to the in-vehicle displays.
Spare Tire TPMS Sensor
The full-size spare tire (if equipped) has a TPMS sensor that remains passive until
the spare is installed as a driving wheel. After installing the full-size spare tire, you
may have to drive for up to 10 minutes to allow the TPMS sensor to complete the
automatic learning process.
The compact spare tire (if equipped) doesn’t have a TPMS sensor and will not
display tire pressure.
To Next Page
Loading...
Need help?
General
