What to do if my Riviera RLED-DSG32CHD1000 TV remote control is not working?
If your Riviera TV remote control isn't working, first, check for any obstructions between the remote and the TV. Next, ensure the batteries are installed with the correct polarity (+ to +, - to -). Verify that the remote is set to the correct operating mode (TV, VCR, etc.). If these steps don't resolve the issue, try installing new batteries.
Why is there a picture but no sound on my Riviera RLED-DSG32CHD1000 TV?
If you have a normal picture but no sound on your Riviera TV, start by checking the volume level. Also, make sure the sound isn't muted by pressing the MUTE button. Try changing to another channel, as the problem might be with the broadcast. Finally, check if the audio cables are installed properly.
Why does my Riviera RLED-DSG32CHD1000 TV power turn off suddenly?
If your Riviera TV is suddenly turning off, check if the sleep timer is set. Also, examine the power control settings. Consider that the power might have been interrupted or that there is no broadcast on the tuned station with auto-activation.
How to resolve poor color or picture quality on Riviera TV?
To resolve poor color or picture quality on your Riviera TV, first, adjust the color settings in the menu options. Ensure there's sufficient distance between the TV and any VCRs. Try tuning to another channel to rule out broadcast issues. Check that the VIDEO cables are correctly installed. You can also try activating any function to restore the brightness of the picture.
What to do if my Riviera RLED-DSG32CHD1000 has poor reception on some channels?
If your Riviera TV has poor reception on some channels, it could be due to the station or cable product experiencing problems, so try tuning to another station. If the station signal is weak, reorient the antenna to better receive the weaker signal. Also, check for any sources of possible interference.
How to fix 'The signal is out of range' error on Riviera RLED-DSG32CHD1000?
To fix 'The signal is out of range' error on your Riviera TV, adjust the resolution, horizontal frequency, or vertical frequency. Check whether the signal cable is connected properly and not loose. Also, verify the input source.
Why does the picture appear slowly after switching on my Riviera TV?
The image is muted during the product startup process. If the picture has not appeared after five minutes, please contact your service center.
How to stop horizontal or vertical bars or picture shaking on my Riviera RLED-DSG32CHD1000 TV?
To stop horizontal or vertical bars or picture shaking on your Riviera TV, check for local interference from electrical appliances or power tools.
How to remove lines or streaks in pictures on Riviera RLED-DSG32CHD1000?
To remove lines or streaks in pictures on your Riviera TV, check the antenna and try changing its direction.
What to do if there is no output from one of the speakers on my Riviera TV?
If there's no output from one of the speakers on your Riviera TV, adjust the balance in the menu option.
Information regarding radio frequency energy emissions and potential interference.
Setting up and managing TV channels for air or cable reception.
Adjusting picture settings like mode, color, contrast, and brightness.
Adjusting sound settings such as mode, balance, and AVL.
Setting up network connections for internet access via wired or wireless.
Guide to using the Personal Video Recorder (PVR) function for recording TV programs.
To Next Page
General