Operator’s Guide Appendix F
002-5572 RJS, Minneapolis, MN
37
Appendix F (Symbology Analysis)
Symbology Analysis Parameters
Table F-1 shows error messages that will be displayed for each parameter type checked by the Laser Inspec-
tor.
Table F-1 (Parameter/Error Message)
Parameter Data Analysis Message
Ratio Warning Ratio
Inter-Character Gap (ICG) Invalid Format
Data Character Invalid format
Mod Check Digits Bad Mod Check
Bar Width Deviation Range Warning Wide (or narrow)
Bar Width Deviation Ave. Rejected Wide (or narrow)
Addendum Parity
(UPC/EAN)
Invalid Format
ANSI Decodability
(if enabled)
Warn D/bility (DCD, in initial
Pass/Fail screen)
Object in Quiet Zone Warning QZ/SS
To Next Page
