RJX Hobby X-TREME 50 - User Manual

ASSEMBLY INSTRUCTIONS
Technical Data:
Overall Length
Overall Height
Overall Wide
Main Rotor Diameter
Tail Rotor Diameter
Gear Ratio
Gross Weight
1260 mm
390 mm
210 mm
1339 mm
233 mm
8.5:1:4.7 (8.5:1:5.2 Optional)
3200g - 3300g
PLEASE READ AND UNDERSTAND THE INSTRUCTIONS THOROUGHLY BEFORE ASSEMBLY
VERSION1.4

Summary

Technical Data

INTRODUCTION

HOW TO USE THIS INSTRUCTION MANUAL

TO PREVENT LOOSE SCREWS AND BOLTS

ADDITIONAL ITEMS REQUIRED TO COMPLETE THE X-TREME 50

TOOLS REQUIRED (NOT INCLUDED)

STEP 9-1 FINAL SERVO AND RADIO SETUP

Rudder and Throttle Servo Adjustments

Adjustments for rudder and throttle servos, including rotation check, travel adjust, and sub trim.

STEP 9-3 FINAL SERVO AND RADIO SETUP

7.Collective Pitch Setup.

Procedure for setting collective pitch angles using a pitch gauge for different flight modes.

8.Pitch Curve

Setting the main blade pitch according to collective stick position for various flight modes.

STEP 9-4 FINAL SERVO AND RADIO SETUP

9. Throttle Curve

Matching throttle curves to main blade pitch for optimal engine performance and safety.

10. Engine Adjustment

Guidance on setting up the engine mixture needle and break-in procedures.

RJX Hobby X-TREME 50 Specifications