Carefully cut any straps from
around the box, pop open the
staples (WARNING! These staples
can be very sharp, take great care).
Open the box and lay out the con-
tents. It should look something like
the picture below.
Now carefully remove all foam,
card and plastic packaging using a
knife/scissors. Please be extremely
careful not to damage your new
paintwork. Once all packaging has
been removed, lay out the main
RKR assembly and loose
components and have a visual
check for any significant shipping
damage.
Please note: There may be minor scratches as a result of the courier’s heavy handedness, this is a
fact of mail order that sadly cannot be avoided. Therefore, please note we cannot replace bikes/parts as
a result of minor scratches. Touch up paint is available.
To Next Page
Loading...