You should now have the main RKR
BMX assembly, some bars with pre
installed grips, a pair of pedals (one
stickered ‘L’, the other stickered ‘R’)
and a seat/post unit. If anything is
missing, now is the time to let us
know.
To make life easier, we are going
to install the pedals first. Thread
the left pedal (stickered ‘L’) into the
crank arm using the 15mm spanner.
Please note, to tighten a left (L)
pedal you must turn anti clockwise
NOT clockwise. Be careful not to
cross thread your crank arm or
pedal axle and make sure the pedal
is done up nice and tight. Running
loose pedals destroys threads very
quickly!
To Next Page
Loading...