Need help?Do you have a question about the RKS RS100 and is the answer not in the manual?
Indicates critical safety precautions to avoid severe injury or death.
Highlights precautions to prevent instrument damage or malfunction.
Provides critical warnings and guidelines for safe and proper instrument mounting.
Provides essential warnings and guidelines for safe and correct electrical wiring of the instrument.
Lists essential checks and precautions before operating the instrument.
Provides step-by-step examples for controller setup prior to operation.
Guides on performing initial setup, especially for parameters not specified during ordering.
Details the procedure for setting the desired control target value (SV).
Explains how to set the alarm set values if they are used.
Describes how to automatically tune PID parameters using the Autotuning (AT) function.
Explains how to configure PV flashing, control output, and alarm actions for input errors.
Guides on assigning control, alarm, or HBA functions to the output terminals.
Explains how to use setting limiters to restrict the adjustable range of the Set Value (SV).
Details the Set Data Lock function for limiting parameter access and preventing accidental changes.
Explains the Control Loop Break Alarm function, its setup, and operation.
Covers the setup and configuration of the optional Heater Break Alarm function.
Describes the Autotuning function for automatically calculating and setting optimal PID values.
Explains the Startup Tuning function for automatic PID value calculation based on system response.
Provides guidance on manually adjusting PID parameters like proportional band, integral time, and derivative time.
Describes the Fine Tuning function to adjust control response and reduce overshoot.
Describes common error displays, their meanings, and actions.
Provides possible causes and solutions for various operational and display-related problems.
Details PID and Heat/Cool PID control parameters like proportional band, integral time, and derivative time.
Lists alarm types, setting ranges, additional functions, and actions.
Specifies HBA parameters, setting ranges, and comprehensive alarm logic.
Lists self-diagnostic errors and their corresponding actions and displays.
General| Brand | RKS |
|---|---|
| Model | RS100 |
| Category | Temperature Controller |
| Language | English |
To Next Page